How to reduce resource consumption on older system

Experiencing technical difficulties? Think you've found a problem with PokerAce Hud? Report it here.

Moderator: Moderators

How to reduce resource consumption on older system

Postby JeyBurns » Thu May 08, 2008 11:39 am

Hello,

I just installed Pokertracker (2) and PAH on an older Laptop. Obviously the resources aren´t that good. I have 512MB RAM and a relatively slow hard disk. The CPU is an older P4 mobile with a 1,8 ghz cpu.

When playing, I experience the following problem: Although I set the value on only 7 seconds, the mucked hands remain displayed on the table for minutes and won´t disappear, although a new hand is already in process.

When I import hands into pokertracker, the whole system freezes.

Do you have any recommendations for improving my system? Is there anything that can be done to lower the resource consumption of Pokertracker, Pokerace Hud or my system in general? I already installed a lean windows xp professional system and left out most unnecessary stuff.

Best regards

Jens
JeyBurns
 
Posts: 20
Joined: Fri Jan 25, 2008 10:23 am

Re: How to reduce resource consumption on older system

Postby prajna » Thu May 08, 2008 1:12 pm

Maybe upgrading the ram to a gig will help somewhat. Also, my laptop goes faster when plugged into the wall compared to (say) running on batteries, so that might help also. How big is your database?

~ Thomas
[Pokertracker support]
prajna
 
Posts: 734
Joined: Thu Apr 03, 2008 1:58 pm

Re: How to reduce resource consumption on older system

Postby JeyBurns » Thu May 08, 2008 1:50 pm

prajna wrote:How big is your database?

If I use all data, it´s around 200.000 hands stored in postgresql. Of course I don´t have to use all data, so most of the time, there are ~20-50k hh to be used.
JeyBurns
 
Posts: 20
Joined: Fri Jan 25, 2008 10:23 am

Re: How to reduce resource consumption on older system

Postby APerfect10 » Fri May 09, 2008 12:56 am

Hit CTRL-ALT-DELETE to open your Task manager. Under the processes tab, find 'ptrack.exe' and right-click -> Set Priority -> Below Normal.

That should help cut down on your computer freezing during imports. Otherwise, there is not much we can do on an older system with that many hand histories...

You will more than likely need to keep your database small if you want any type of decent performance.

Best regards,

Derek
APerfect10
Site Admin
 
Posts: 4489
Joined: Sat Dec 08, 2007 6:03 pm


Return to Technical Support

Who is online

Users browsing this forum: No registered users and 0 guests